Minnesota Well Data › Wabasha County
Wabasha County, Minnesota: well depth, water level & drilling cost
✓ 2,032 CWI records · verified 2026-06-29
How deep are wells in Wabasha County, Minnesota?
The median drilled well depth in Wabasha County is 174 ft, based on 2,027 wells with recorded depths in the state CWI database. Half of all wells fall between 73 ft and 378 ft; 90% are shallower than 480 ft. Wells drilled since 2016 have a median depth of 145 ft.
How much does it cost to drill a well in Wabasha County?
Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Wabasha County?
The median static water level is 72 ft below ground surface (middle half of wells: 31 ft–178 ft), from 880 measurements.
How much water do wells in Wabasha County produce?
The median tested yield is 18 gpm (middle half: 15 gpm–20 gpm), from 1,392 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Wabasha County address — $19
Drilled depth distribution
Who drills wells in Wabasha County?
Drillers by number of wells completed in this county since 2016, per filed well records (Minnesota County Well Index).
| Driller | Wells since 2016 |
|---|---|
| HARTERT, E | 69 |
| DOFFING, P | 16 |
| DRUSSELL, D | 13 |
| CARLSON, P | 12 |
| UNDERDAHL, N | 11 |
| HARTERT, E. | 10 |
| HARTET, E | 10 |
| PETERSON, S | 8 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Wabasha County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Wabasha (55981) — 564 wells, median 67 ft
- Lake City (55041) — 339 wells, median 261 ft
- Kellogg (55945) — 192 wells, median 118 ft
- Plainview (55964) — 156 wells, median 392 ft
- Mazeppa (55956) — 145 wells, median 313 ft
- Zumbro Falls (55991) — 119 wells, median 340 ft
- Millville (55957) — 87 wells, median 320 ft
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.