Minnesota Well Data › Chisago County › Almelund (55002)
Almelund, MN (55002): well depth, water level & drilling cost
✓ 170 CWI records · Chisago County
Pull every recorded well near a Almelund (55002) address — $49
How deep are wells in and around Almelund (55002), Minnesota?
The median drilled well depth in and around Almelund (55002) is 141 ft, based on 170 wells with recorded depths in the state CWI database. Half fall between 112 ft and 200 ft; 90% are shallower than 277 ft.
How much does it cost to drill a well in and around Almelund (55002)?
Applying published per-foot rates to the local median depth of 141 ft: drilling and casing alone typically runs $3,525–$9,165; a complete system including pump, pressure tank, and hookup typically runs $8,460–$14,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Almelund (55002)?
The median static water level is 45 ft below ground surface (middle half of wells: 30 ft–70 ft), from 160 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Chisago County.
Part of Chisago County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.