Minnesota Well Data › Washington County › Lake Elmo (55042)
Lake Elmo, MN (55042): well depth, water level & drilling cost
✓ 1,350 CWI records · Washington County
Pull every recorded well near a Lake Elmo (55042) address — $49
How deep are wells in Lake Elmo (55042), Minnesota?
The median drilled well depth in Lake Elmo (55042) is 158 ft, based on 1,242 wells with recorded depths in the state CWI database. Half fall between 125 ft and 220 ft; 90% are shallower than 270 ft.
How much does it cost to drill a well in Lake Elmo (55042)?
Applying published per-foot rates to the local median depth of 158 ft: drilling and casing alone typically runs $3,950–$10,270; a complete system including pump, pressure tank, and hookup typically runs $9,480–$15,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Lake Elmo (55042)?
The median static water level is 69 ft below ground surface (middle half of wells: 50 ft–90 ft), from 1,151 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Washington County.
Part of Washington County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.