Minnesota Well Data › Steele County › Owatonna (55060)
Owatonna, MN (55060): well depth, water level & drilling cost
✓ 505 CWI records · Steele County
Pull every recorded well near a Owatonna (55060) address — $49
How deep are wells in Owatonna (55060), Minnesota?
The median drilled well depth in Owatonna (55060) is 170 ft, based on 505 wells with recorded depths in the state CWI database. Half fall between 135 ft and 222 ft; 90% are shallower than 295 ft.
How much does it cost to drill a well in Owatonna (55060)?
Applying published per-foot rates to the local median depth of 170 ft: drilling and casing alone typically runs $4,250–$11,050; a complete system including pump, pressure tank, and hookup typically runs $10,200–$17,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Owatonna (55060)?
The median static water level is 36 ft below ground surface (middle half of wells: 20 ft–60 ft), from 425 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Steele County.
Part of Steele County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.