Minnesota Well Data › Washington County › Paul Park (55071)
Paul Park, MN (55071): well depth, water level & drilling cost
✓ 157 CWI records · Washington County
Pull every recorded well near a Paul Park (55071) address — $49
How deep are wells in Paul Park (55071), Minnesota?
The median drilled well depth in Paul Park (55071) is 200 ft, based on 145 wells with recorded depths in the state CWI database. Half fall between 157 ft and 240 ft; 90% are shallower than 314 ft.
How much does it cost to drill a well in Paul Park (55071)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Paul Park (55071)?
The median static water level is 59 ft below ground surface (middle half of wells: 38 ft–86 ft), from 128 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Washington County.
Part of Washington County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.