⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Ramsey County › Paul (55106)

Paul, MN (55106): well depth, water level & drilling cost

✓ 147 CWI records · Ramsey County

100 ftmedian well depth
69 ft–160 fttypical depth range
25 ftmedian static water level
15 gpmmedian yield (118 tests)

Pull every recorded well near a Paul (55106) address — $49

How deep are wells in Paul (55106), Minnesota?

The median drilled well depth in Paul (55106) is 100 ft, based on 146 wells with recorded depths in the state CWI database. Half fall between 69 ft and 160 ft; 90% are shallower than 260 ft.

How much does it cost to drill a well in Paul (55106)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Paul (55106)?

The median static water level is 25 ft below ground surface (middle half of wells: 14 ft–48 ft), from 110 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 60 100–150 ft 36 150–200 ft 13 200–300 ft 17 300–400 ft 5 400–600 ft 5 600+ ft 0
Looking at a specific property in Paul (55106)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Paul (55106)

Free. Goes to licensed drillers working Ramsey County.

Part of Ramsey County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.