Minnesota Well Data › Washington County › Saint Paul (55115)
Saint Paul, MN (55115): well depth, water level & drilling cost
✓ 614 CWI records · Washington County
Pull every recorded well near a Saint Paul (55115) address — $49
How deep are wells in and around Saint Paul (55115), Minnesota?
The median drilled well depth in and around Saint Paul (55115) is 171 ft, based on 613 wells with recorded depths in the state CWI database. Half fall between 147 ft and 200 ft; 90% are shallower than 231 ft.
How much does it cost to drill a well in and around Saint Paul (55115)?
Applying published per-foot rates to the local median depth of 171 ft: drilling and casing alone typically runs $4,275–$11,115; a complete system including pump, pressure tank, and hookup typically runs $10,260–$17,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Saint Paul (55115)?
The median static water level is 52 ft below ground surface (middle half of wells: 39 ft–77 ft), from 561 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Washington County.
Part of Washington County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.