⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Dakota County › Paul (55118)

Paul, MN (55118): well depth, water level & drilling cost

✓ 247 CWI records · Dakota County

142 ftmedian well depth
71 ft–304 fttypical depth range
36 ftmedian static water level
20 gpmmedian yield (179 tests)

How deep are wells in Paul (55118), Minnesota?

The median drilled well depth in Paul (55118) is 142 ft, based on 234 wells with recorded depths in the state CWI database. Half fall between 71 ft and 304 ft; 90% are shallower than 396 ft.

How much does it cost to drill a well in Paul (55118)?

Applying published per-foot rates to the local median depth of 340 ft: drilling and casing alone typically runs $8,500–$22,100; a complete system including pump, pressure tank, and hookup typically runs $20,400–$34,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Paul (55118)?

The median static water level is 36 ft below ground surface (middle half of wells: 12 ft–162 ft), from 182 measurements.

Pull every recorded well near a Paul (55118) address — $19

Drilled depth distribution

0–50 ft 14 50–100 ft 79 100–150 ft 30 150–200 ft 12 200–300 ft 39 300–400 ft 36 400–600 ft 23 600+ ft 1
Looking at a specific property in Paul (55118)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Dakota County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.