⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Ramsey County › Paul (55119)

Paul, MN (55119): well depth, water level & drilling cost

✓ 284 CWI records · Ramsey County

159 ftmedian well depth
77 ft–262 fttypical depth range
60 ftmedian static water level
20 gpmmedian yield (191 tests)

How deep are wells in Paul (55119), Minnesota?

The median drilled well depth in Paul (55119) is 159 ft, based on 245 wells with recorded depths in the state CWI database. Half fall between 77 ft and 262 ft; 90% are shallower than 372 ft.

How much does it cost to drill a well in Paul (55119)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Paul (55119)?

The median static water level is 60 ft below ground surface (middle half of wells: 20 ft–170 ft), from 207 measurements.

Pull every recorded well near a Paul (55119) address — $19

Drilled depth distribution

0–50 ft 8 50–100 ft 79 100–150 ft 33 150–200 ft 19 200–300 ft 61 300–400 ft 27 400–600 ft 18 600+ ft 0
Looking at a specific property in Paul (55119)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Ramsey County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.