Minnesota Well Data › Wright County › Annandale (55302)
Annandale, MN (55302): well depth, water level & drilling cost
✓ 1,916 CWI records · Wright County
Pull every recorded well near a Annandale (55302) address — $49
How deep are wells in Annandale (55302), Minnesota?
The median drilled well depth in Annandale (55302) is 85 ft, based on 1,914 wells with recorded depths in the state CWI database. Half fall between 65 ft and 116 ft; 90% are shallower than 160 ft.
How much does it cost to drill a well in Annandale (55302)?
Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Annandale (55302)?
The median static water level is 28 ft below ground surface (middle half of wells: 15 ft–45 ft), from 1,493 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Wright County.
Part of Wright County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.