⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Hennepin County › Dayton (55327)

Dayton, MN (55327): well depth, water level & drilling cost

✓ 1,214 CWI records · Hennepin County

112 ftmedian well depth
85 ft–162 fttypical depth range
32 ftmedian static water level
30 gpmmedian yield (1,183 tests)

Pull every recorded well near a Dayton (55327) address — $49

How deep are wells in Dayton (55327), Minnesota?

The median drilled well depth in Dayton (55327) is 112 ft, based on 1,210 wells with recorded depths in the state CWI database. Half fall between 85 ft and 162 ft; 90% are shallower than 215 ft.

How much does it cost to drill a well in Dayton (55327)?

Applying published per-foot rates to the local median depth of 112 ft: drilling and casing alone typically runs $2,800–$7,280; a complete system including pump, pressure tank, and hookup typically runs $6,720–$11,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Dayton (55327)?

The median static water level is 32 ft below ground surface (middle half of wells: 20 ft–45 ft), from 1,136 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 505 100–150 ft 311 150–200 ft 219 200–300 ft 151 300–400 ft 13 400–600 ft 1 600+ ft 1
Looking at a specific property in Dayton (55327)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dayton (55327)

Free. Goes to licensed drillers working Hennepin County.

Part of Hennepin County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.