Minnesota Well Data › Dakota County › Burnsville (55337)
Burnsville, MN (55337): well depth, water level & drilling cost
✓ 470 CWI records · Dakota County
Pull every recorded well near a Burnsville (55337) address — $49
How deep are wells in Burnsville (55337), Minnesota?
The median drilled well depth in Burnsville (55337) is 167 ft, based on 451 wells with recorded depths in the state CWI database. Half fall between 84 ft and 250 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in Burnsville (55337)?
Applying published per-foot rates to the local median depth of 167 ft: drilling and casing alone typically runs $4,175–$10,855; a complete system including pump, pressure tank, and hookup typically runs $10,020–$16,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Burnsville (55337)?
The median static water level is 55 ft below ground surface (middle half of wells: 20 ft–126 ft), from 361 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Dakota County.
Part of Dakota County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.