Minnesota Well Data › Hennepin County › Corcoran (55340)
Corcoran, MN (55340): well depth, water level & drilling cost
✓ 1,019 CWI records · Hennepin County
Pull every recorded well near a Corcoran (55340) address — $49
How deep are wells in Corcoran (55340), Minnesota?
The median drilled well depth in Corcoran (55340) is 207 ft, based on 1,019 wells with recorded depths in the state CWI database. Half fall between 150 ft and 261 ft; 90% are shallower than 321 ft.
How much does it cost to drill a well in Corcoran (55340)?
Applying published per-foot rates to the local median depth of 207 ft: drilling and casing alone typically runs $5,175–$13,455; a complete system including pump, pressure tank, and hookup typically runs $12,420–$20,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Corcoran (55340)?
The median static water level is 80 ft below ground surface (middle half of wells: 62 ft–98 ft), from 882 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hennepin County.
Part of Hennepin County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.