Minnesota Well Data › Hennepin County › Long Lake (55356)
Long Lake, MN (55356): well depth, water level & drilling cost
✓ 956 CWI records · Hennepin County
Pull every recorded well near a Long Lake (55356) address — $49
How deep are wells in Long Lake (55356), Minnesota?
The median drilled well depth in Long Lake (55356) is 170 ft, based on 955 wells with recorded depths in the state CWI database. Half fall between 137 ft and 219 ft; 90% are shallower than 290 ft.
How much does it cost to drill a well in Long Lake (55356)?
Applying published per-foot rates to the local median depth of 170 ft: drilling and casing alone typically runs $4,250–$11,050; a complete system including pump, pressure tank, and hookup typically runs $10,200–$17,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Long Lake (55356)?
The median static water level is 90 ft below ground surface (middle half of wells: 69 ft–110 ft), from 821 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hennepin County.
Part of Hennepin County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.