Minnesota Well Data › Scott County › Savage (55378)
Savage, MN (55378): well depth, water level & drilling cost
✓ 358 CWI records · Scott County
Pull every recorded well near a Savage (55378) address — $49
How deep are wells in and around Savage (55378), Minnesota?
The median drilled well depth in and around Savage (55378) is 163 ft, based on 358 wells with recorded depths in the state CWI database. Half fall between 115 ft and 196 ft; 90% are shallower than 247 ft.
How much does it cost to drill a well in and around Savage (55378)?
Applying published per-foot rates to the local median depth of 163 ft: drilling and casing alone typically runs $4,075–$10,595; a complete system including pump, pressure tank, and hookup typically runs $9,780–$16,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Savage (55378)?
The median static water level is 80 ft below ground surface (middle half of wells: 30 ft–100 ft), from 277 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Scott County.
Part of Scott County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.