Minnesota Well Data › Carver County › Victoria (55386)
Victoria, MN (55386): well depth, water level & drilling cost
✓ 498 CWI records · Carver County
Pull every recorded well near a Victoria (55386) address — $49
How deep are wells in and around Victoria (55386), Minnesota?
The median drilled well depth in and around Victoria (55386) is 178 ft, based on 498 wells with recorded depths in the state CWI database. Half fall between 154 ft and 232 ft; 90% are shallower than 319 ft.
How much does it cost to drill a well in and around Victoria (55386)?
Applying published per-foot rates to the local median depth of 178 ft: drilling and casing alone typically runs $4,450–$11,570; a complete system including pump, pressure tank, and hookup typically runs $10,680–$17,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Victoria (55386)?
The median static water level is 130 ft below ground surface (middle half of wells: 102 ft–152 ft), from 448 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Carver County.
Part of Carver County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.