Minnesota Well Data › Hennepin County › Bloomington (55438)
Bloomington, MN (55438): well depth, water level & drilling cost
✓ 173 CWI records · Hennepin County
Pull every recorded well near a Bloomington (55438) address — $49
How deep are wells in Bloomington (55438), Minnesota?
The median drilled well depth in Bloomington (55438) is 120 ft, based on 172 wells with recorded depths in the state CWI database. Half fall between 70 ft and 205 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in Bloomington (55438)?
Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Bloomington (55438)?
The median static water level is 47 ft below ground surface (middle half of wells: 13 ft–85 ft), from 146 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hennepin County.
Part of Hennepin County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.