Minnesota Well Data › St. Louis County › Hibbing (55746)
Hibbing, MN (55746): well depth, water level & drilling cost
✓ 1,238 CWI records · St. Louis County
Pull every recorded well near a Hibbing (55746) address — $49
How deep are wells in Hibbing (55746), Minnesota?
The median drilled well depth in Hibbing (55746) is 85 ft, based on 1,232 wells with recorded depths in the state CWI database. Half fall between 59 ft and 130 ft; 90% are shallower than 201 ft.
How much does it cost to drill a well in Hibbing (55746)?
Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Hibbing (55746)?
The median static water level is 18 ft below ground surface (middle half of wells: 10 ft–30 ft), from 941 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working St. Louis County.
Part of St. Louis County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.