⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Aitkin County › Jacobson (55752)

Jacobson, MN (55752): well depth, water level & drilling cost

✓ 190 CWI records · Aitkin County

77 ftmedian well depth
60 ft–128 fttypical depth range
14 ftmedian static water level
15 gpmmedian yield (188 tests)

Pull every recorded well near a Jacobson (55752) address — $49

How deep are wells in Jacobson (55752), Minnesota?

The median drilled well depth in Jacobson (55752) is 77 ft, based on 190 wells with recorded depths in the state CWI database. Half fall between 60 ft and 128 ft; 90% are shallower than 188 ft.

How much does it cost to drill a well in Jacobson (55752)?

Applying published per-foot rates to the local median depth of 77 ft: drilling and casing alone typically runs $1,925–$5,005; a complete system including pump, pressure tank, and hookup typically runs $4,620–$7,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Jacobson (55752)?

The median static water level is 14 ft below ground surface (middle half of wells: 8 ft–24 ft), from 142 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 111 100–150 ft 36 150–200 ft 16 200–300 ft 8 300–400 ft 7 400–600 ft 3 600+ ft 0
Looking at a specific property in Jacobson (55752)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Jacobson (55752)

Free. Goes to licensed drillers working Aitkin County.

Part of Aitkin County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.