Minnesota Well Data › Carlton County › Kettle River (55757)
Kettle River, MN (55757): well depth, water level & drilling cost
✓ 210 CWI records · Carlton County
Pull every recorded well near a Kettle River (55757) address — $49
How deep are wells in Kettle River (55757), Minnesota?
The median drilled well depth in Kettle River (55757) is 101 ft, based on 210 wells with recorded depths in the state CWI database. Half fall between 65 ft and 165 ft; 90% are shallower than 245 ft.
How much does it cost to drill a well in Kettle River (55757)?
Applying published per-foot rates to the local median depth of 101 ft: drilling and casing alone typically runs $2,525–$6,565; a complete system including pump, pressure tank, and hookup typically runs $6,060–$10,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Kettle River (55757)?
The median static water level is 14 ft below ground surface (middle half of wells: 8 ft–20 ft), from 121 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Carlton County.
Part of Carlton County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.