Minnesota Well Data › St. Louis County › Mountain Iron (55768)
Mountain Iron, MN (55768): well depth, water level & drilling cost
✓ 399 CWI records · St. Louis County
Pull every recorded well near a Mountain Iron (55768) address — $49
How deep are wells in Mountain Iron (55768), Minnesota?
The median drilled well depth in Mountain Iron (55768) is 103 ft, based on 395 wells with recorded depths in the state CWI database. Half fall between 56 ft and 135 ft; 90% are shallower than 185 ft.
How much does it cost to drill a well in Mountain Iron (55768)?
Applying published per-foot rates to the local median depth of 103 ft: drilling and casing alone typically runs $2,575–$6,695; a complete system including pump, pressure tank, and hookup typically runs $6,180–$10,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Mountain Iron (55768)?
The median static water level is 22 ft below ground surface (middle half of wells: 14 ft–31 ft), from 289 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working St. Louis County.
Part of St. Louis County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.