Minnesota Well Data › Olmsted County › Rochester (55906)
Rochester, MN (55906): well depth, water level & drilling cost
✓ 419 CWI records · Olmsted County
Pull every recorded well near a Rochester (55906) address — $49
How deep are wells in Rochester (55906), Minnesota?
The median drilled well depth in Rochester (55906) is 395 ft, based on 419 wells with recorded depths in the state CWI database. Half fall between 280 ft and 454 ft; 90% are shallower than 560 ft.
How much does it cost to drill a well in Rochester (55906)?
Applying published per-foot rates to the local median depth of 395 ft: drilling and casing alone typically runs $9,875–$25,675; a complete system including pump, pressure tank, and hookup typically runs $23,700–$39,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Rochester (55906)?
The median static water level is 95 ft below ground surface (middle half of wells: 44 ft–184 ft), from 323 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Olmsted County.
Part of Olmsted County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.