Minnesota Well Data › Mower County › Brownsdale (55918)
Brownsdale, MN (55918): well depth, water level & drilling cost
✓ 51 CWI records · Mower County
Pull every recorded well near a Brownsdale (55918) address — $49
How deep are wells in Brownsdale (55918), Minnesota?
The median drilled well depth in Brownsdale (55918) is 160 ft, based on 49 wells with recorded depths in the state CWI database. Half fall between 122 ft and 206 ft; 90% are shallower than 360 ft.
How much does it cost to drill a well in Brownsdale (55918)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Brownsdale (55918)?
The median static water level is 32 ft below ground surface (middle half of wells: 25 ft–50 ft), from 42 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Mower County.
Part of Mower County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.