⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Olmsted County › Elgin (55932)

Elgin, MN (55932): well depth, water level & drilling cost

✓ 141 CWI records · Olmsted County

393 ftmedian well depth
280 ft–440 fttypical depth range
77 ftmedian static water level
25 gpmmedian yield (63 tests)

Pull every recorded well near a Elgin (55932) address — $49

How deep are wells in Elgin (55932), Minnesota?

The median drilled well depth in Elgin (55932) is 393 ft, based on 141 wells with recorded depths in the state CWI database. Half fall between 280 ft and 440 ft; 90% are shallower than 515 ft.

How much does it cost to drill a well in Elgin (55932)?

Applying published per-foot rates to the local median depth of 393 ft: drilling and casing alone typically runs $9,825–$25,545; a complete system including pump, pressure tank, and hookup typically runs $23,580–$39,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Elgin (55932)?

The median static water level is 77 ft below ground surface (middle half of wells: 35 ft–117 ft), from 103 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 7 100–150 ft 10 150–200 ft 8 200–300 ft 11 300–400 ft 41 400–600 ft 61 600+ ft 3
Looking at a specific property in Elgin (55932)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elgin (55932)

Free. Goes to licensed drillers working Olmsted County.

Part of Olmsted County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.