Minnesota Well Data › Fillmore County › Fountain (55935)
Fountain, MN (55935): well depth, water level & drilling cost
✓ 179 CWI records · Fillmore County
Pull every recorded well near a Fountain (55935) address — $49
How deep are wells in Fountain (55935), Minnesota?
The median drilled well depth in Fountain (55935) is 363 ft, based on 168 wells with recorded depths in the state CWI database. Half fall between 250 ft and 464 ft; 90% are shallower than 520 ft.
How much does it cost to drill a well in Fountain (55935)?
Applying published per-foot rates to the local median depth of 363 ft: drilling and casing alone typically runs $9,075–$23,595; a complete system including pump, pressure tank, and hookup typically runs $21,780–$36,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Fountain (55935)?
The median static water level is 205 ft below ground surface (middle half of wells: 52 ft–275 ft), from 110 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Fillmore County.
Part of Fillmore County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.