Minnesota Well Data › Mower County › Rose Creek (55970)
Rose Creek, MN (55970): well depth, water level & drilling cost
✓ 131 CWI records · Mower County
Pull every recorded well near a Rose Creek (55970) address — $49
How deep are wells in Rose Creek (55970), Minnesota?
The median drilled well depth in Rose Creek (55970) is 151 ft, based on 97 wells with recorded depths in the state CWI database. Half fall between 100 ft and 220 ft; 90% are shallower than 319 ft.
How much does it cost to drill a well in Rose Creek (55970)?
Applying published per-foot rates to the local median depth of 151 ft: drilling and casing alone typically runs $3,775–$9,815; a complete system including pump, pressure tank, and hookup typically runs $9,060–$15,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Rose Creek (55970)?
The median static water level is 25 ft below ground surface (middle half of wells: 16 ft–36 ft), from 65 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Mower County.
Part of Mower County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.