Minnesota Well Data › Fillmore County › Spring Valley (55975)
Spring Valley, MN (55975): well depth, water level & drilling cost
✓ 415 CWI records · Fillmore County
Pull every recorded well near a Spring Valley (55975) address — $49
How deep are wells in Spring Valley (55975), Minnesota?
The median drilled well depth in Spring Valley (55975) is 360 ft, based on 372 wells with recorded depths in the state CWI database. Half fall between 174 ft and 480 ft; 90% are shallower than 529 ft.
How much does it cost to drill a well in Spring Valley (55975)?
Applying published per-foot rates to the local median depth of 360 ft: drilling and casing alone typically runs $9,000–$23,400; a complete system including pump, pressure tank, and hookup typically runs $21,600–$36,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Spring Valley (55975)?
The median static water level is 245 ft below ground surface (middle half of wells: 50 ft–310 ft), from 288 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Fillmore County.
Part of Fillmore County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.