⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Faribault County › Elmore (56027)

Elmore, MN (56027): well depth, water level & drilling cost

✓ 67 CWI records · Faribault County

145 ftmedian well depth
121 ft–173 fttypical depth range
24 ftmedian static water level
30 gpmmedian yield (58 tests)

Pull every recorded well near a Elmore (56027) address — $49

How deep are wells in Elmore (56027), Minnesota?

The median drilled well depth in Elmore (56027) is 145 ft, based on 66 wells with recorded depths in the state CWI database. Half fall between 121 ft and 173 ft; 90% are shallower than 193 ft.

How much does it cost to drill a well in Elmore (56027)?

Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Elmore (56027)?

The median static water level is 24 ft below ground surface (middle half of wells: 17 ft–32 ft), from 58 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 8 100–150 ft 25 150–200 ft 26 200–300 ft 5 300–400 ft 0 400–600 ft 1 600+ ft 0
Looking at a specific property in Elmore (56027)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elmore (56027)

Free. Goes to licensed drillers working Faribault County.

Part of Faribault County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.