Minnesota Well Data › Freeborn County › Freeborn (56032)
Freeborn, MN (56032): well depth, water level & drilling cost
✓ 78 CWI records · Freeborn County
Pull every recorded well near a Freeborn (56032) address — $49
How deep are wells in and around Freeborn (56032), Minnesota?
The median drilled well depth in and around Freeborn (56032) is 182 ft, based on 77 wells with recorded depths in the state CWI database. Half fall between 155 ft and 207 ft; 90% are shallower than 253 ft.
How much does it cost to drill a well in and around Freeborn (56032)?
Applying published per-foot rates to the local median depth of 182 ft: drilling and casing alone typically runs $4,550–$11,830; a complete system including pump, pressure tank, and hookup typically runs $10,920–$18,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Freeborn (56032)?
The median static water level is 56 ft below ground surface (middle half of wells: 40 ft–64 ft), from 67 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Freeborn County.
Part of Freeborn County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.