Minnesota Well Data › Faribault County › Frost (56033)
Frost, MN (56033): well depth, water level & drilling cost
✓ 55 CWI records · Faribault County
Pull every recorded well near a Frost (56033) address — $49
How deep are wells in and around Frost (56033), Minnesota?
The median drilled well depth in and around Frost (56033) is 132 ft, based on 55 wells with recorded depths in the state CWI database. Half fall between 105 ft and 160 ft; 90% are shallower than 196 ft.
How much does it cost to drill a well in and around Frost (56033)?
Applying published per-foot rates to the local median depth of 132 ft: drilling and casing alone typically runs $3,300–$8,580; a complete system including pump, pressure tank, and hookup typically runs $7,920–$13,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Frost (56033)?
The median static water level is 22 ft below ground surface (middle half of wells: 15 ft–31 ft), from 52 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Faribault County.
Part of Faribault County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.