Minnesota Well Data › Freeborn County › Glenville (56036)
Glenville, MN (56036): well depth, water level & drilling cost
✓ 192 CWI records · Freeborn County
Pull every recorded well near a Glenville (56036) address — $49
How deep are wells in Glenville (56036), Minnesota?
The median drilled well depth in Glenville (56036) is 140 ft, based on 192 wells with recorded depths in the state CWI database. Half fall between 120 ft and 170 ft; 90% are shallower than 198 ft.
How much does it cost to drill a well in Glenville (56036)?
Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Glenville (56036)?
The median static water level is 33 ft below ground surface (middle half of wells: 18 ft–48 ft), from 178 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Freeborn County.
Part of Freeborn County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.