Minnesota Well Data › Nobles County › Fulda (56131)
Fulda, MN (56131): well depth, water level & drilling cost
✓ 279 CWI records · Nobles County
Pull every recorded well near a Fulda (56131) address — $49
How deep are wells in and around Fulda (56131), Minnesota?
The median drilled well depth in and around Fulda (56131) is 150 ft, based on 275 wells with recorded depths in the state CWI database. Half fall between 100 ft and 202 ft; 90% are shallower than 370 ft.
How much does it cost to drill a well in and around Fulda (56131)?
Applying published per-foot rates to the local median depth of 150 ft: drilling and casing alone typically runs $3,750–$9,750; a complete system including pump, pressure tank, and hookup typically runs $9,000–$15,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Fulda (56131)?
The median static water level is 40 ft below ground surface (middle half of wells: 26 ft–70 ft), from 257 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Nobles County.
Part of Nobles County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.