Minnesota Well Data › Lac Qui Parle County › Bellingham (56212)
Bellingham, MN (56212): well depth, water level & drilling cost
✓ 80 CWI records · Lac Qui Parle County
Pull every recorded well near a Bellingham (56212) address — $49
How deep are wells in Bellingham (56212), Minnesota?
The median drilled well depth in Bellingham (56212) is 147 ft, based on 80 wells with recorded depths in the state CWI database. Half fall between 80 ft and 187 ft; 90% are shallower than 215 ft.
How much does it cost to drill a well in Bellingham (56212)?
Applying published per-foot rates to the local median depth of 147 ft: drilling and casing alone typically runs $3,675–$9,555; a complete system including pump, pressure tank, and hookup typically runs $8,820–$14,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Bellingham (56212)?
The median static water level is 35 ft below ground surface (middle half of wells: 25 ft–51 ft), from 70 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lac Qui Parle County.
Part of Lac Qui Parle County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.