⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Renville County › Danube (56230)

Danube, MN (56230): well depth, water level & drilling cost

✓ 125 CWI records · Renville County

181 ftmedian well depth
90 ft–239 fttypical depth range
25 ftmedian static water level
15 gpmmedian yield (107 tests)

Pull every recorded well near a Danube (56230) address — $49

How deep are wells in Danube (56230), Minnesota?

The median drilled well depth in Danube (56230) is 181 ft, based on 125 wells with recorded depths in the state CWI database. Half fall between 90 ft and 239 ft; 90% are shallower than 278 ft.

How much does it cost to drill a well in Danube (56230)?

Applying published per-foot rates to the local median depth of 181 ft: drilling and casing alone typically runs $4,525–$11,765; a complete system including pump, pressure tank, and hookup typically runs $10,860–$18,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Danube (56230)?

The median static water level is 25 ft below ground surface (middle half of wells: 18 ft–35 ft), from 105 measurements.

Drilled depth distribution

0–50 ft 6 50–100 ft 28 100–150 ft 10 150–200 ft 27 200–300 ft 44 300–400 ft 10 400–600 ft 0 600+ ft 0
Looking at a specific property in Danube (56230)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Danube (56230)

Free. Goes to licensed drillers working Renville County.

Part of Renville County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.