Minnesota Well Data › Stearns County › Belgrade (56312)
Belgrade, MN (56312): well depth, water level & drilling cost
✓ 683 CWI records · Stearns County
Pull every recorded well near a Belgrade (56312) address — $49
How deep are wells in Belgrade (56312), Minnesota?
The median drilled well depth in Belgrade (56312) is 120 ft, based on 683 wells with recorded depths in the state CWI database. Half fall between 50 ft and 165 ft; 90% are shallower than 196 ft.
How much does it cost to drill a well in Belgrade (56312)?
Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Belgrade (56312)?
The median static water level is 15 ft below ground surface (middle half of wells: 8 ft–25 ft), from 406 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Stearns County.
Part of Stearns County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.