Minnesota Well Data › Stearns County › Holdingford (56340)
Holdingford, MN (56340): well depth, water level & drilling cost
✓ 629 CWI records · Stearns County
Pull every recorded well near a Holdingford (56340) address — $49
How deep are wells in Holdingford (56340), Minnesota?
The median drilled well depth in Holdingford (56340) is 71 ft, based on 629 wells with recorded depths in the state CWI database. Half fall between 54 ft and 104 ft; 90% are shallower than 155 ft.
How much does it cost to drill a well in Holdingford (56340)?
Applying published per-foot rates to the local median depth of 71 ft: drilling and casing alone typically runs $1,775–$4,615; a complete system including pump, pressure tank, and hookup typically runs $4,260–$7,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Holdingford (56340)?
The median static water level is 22 ft below ground surface (middle half of wells: 13 ft–35 ft), from 392 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Stearns County.
Part of Stearns County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.