⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Aitkin County › Mcgrath (56350)

Mcgrath, MN (56350): well depth, water level & drilling cost

✓ 192 CWI records · Aitkin County

76 ftmedian well depth
58 ft–102 fttypical depth range
14 ftmedian static water level
12 gpmmedian yield (184 tests)

Pull every recorded well near a Mcgrath (56350) address — $49

How deep are wells in Mcgrath (56350), Minnesota?

The median drilled well depth in Mcgrath (56350) is 76 ft, based on 192 wells with recorded depths in the state CWI database. Half fall between 58 ft and 102 ft; 90% are shallower than 165 ft.

How much does it cost to drill a well in Mcgrath (56350)?

Applying published per-foot rates to the local median depth of 76 ft: drilling and casing alone typically runs $1,900–$4,940; a complete system including pump, pressure tank, and hookup typically runs $4,560–$7,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Mcgrath (56350)?

The median static water level is 14 ft below ground surface (middle half of wells: 9 ft–21 ft), from 150 measurements.

Drilled depth distribution

0–50 ft 39 50–100 ft 101 100–150 ft 30 150–200 ft 3 200–300 ft 10 300–400 ft 4 400–600 ft 5 600+ ft 0
Looking at a specific property in Mcgrath (56350)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mcgrath (56350)

Free. Goes to licensed drillers working Aitkin County.

Part of Aitkin County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.