⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Stearns County › Stephen (56375)

Stephen, MN (56375): well depth, water level & drilling cost

✓ 159 CWI records · Stearns County

91 ftmedian well depth
74 ft–112 fttypical depth range
46 ftmedian static water level
20 gpmmedian yield (152 tests)

How deep are wells in Stephen (56375), Minnesota?

The median drilled well depth in Stephen (56375) is 91 ft, based on 159 wells with recorded depths in the state CWI database. Half fall between 74 ft and 112 ft; 90% are shallower than 129 ft.

How much does it cost to drill a well in Stephen (56375)?

Applying published per-foot rates to the local median depth of 89 ft: drilling and casing alone typically runs $2,225–$5,785; a complete system including pump, pressure tank, and hookup typically runs $5,340–$8,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Stephen (56375)?

The median static water level is 46 ft below ground surface (middle half of wells: 29 ft–72 ft), from 105 measurements.

Pull every recorded well near a Stephen (56375) address — $19

Drilled depth distribution

0–50 ft 12 50–100 ft 92 100–150 ft 50 150–200 ft 4 200–300 ft 1 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Stephen (56375)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Stearns County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.