Minnesota Well Data › Morrison County › Swanville (56382)
Swanville, MN (56382): well depth, water level & drilling cost
✓ 380 CWI records · Morrison County
Pull every recorded well near a Swanville (56382) address — $49
How deep are wells in Swanville (56382), Minnesota?
The median drilled well depth in Swanville (56382) is 74 ft, based on 380 wells with recorded depths in the state CWI database. Half fall between 54 ft and 105 ft; 90% are shallower than 199 ft.
How much does it cost to drill a well in Swanville (56382)?
Applying published per-foot rates to the local median depth of 74 ft: drilling and casing alone typically runs $1,850–$4,810; a complete system including pump, pressure tank, and hookup typically runs $4,440–$7,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Swanville (56382)?
The median static water level is 23 ft below ground surface (middle half of wells: 14 ft–32 ft), from 265 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Morrison County.
Part of Morrison County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.