Minnesota Well Data › Todd County › Browerville (56438)
Browerville, MN (56438): well depth, water level & drilling cost
✓ 656 CWI records · Todd County
Pull every recorded well near a Browerville (56438) address — $49
How deep are wells in Browerville (56438), Minnesota?
The median drilled well depth in Browerville (56438) is 72 ft, based on 643 wells with recorded depths in the state CWI database. Half fall between 57 ft and 96 ft; 90% are shallower than 127 ft.
How much does it cost to drill a well in Browerville (56438)?
Applying published per-foot rates to the local median depth of 72 ft: drilling and casing alone typically runs $1,800–$4,680; a complete system including pump, pressure tank, and hookup typically runs $4,320–$7,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Browerville (56438)?
The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–32 ft), from 453 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Todd County.
Part of Todd County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.