Minnesota Well Data › Crow Wing County › Crosslake (56442)
Crosslake, MN (56442): well depth, water level & drilling cost
✓ 1,583 CWI records · Crow Wing County
Pull every recorded well near a Crosslake (56442) address — $49
How deep are wells in Crosslake (56442), Minnesota?
The median drilled well depth in Crosslake (56442) is 70 ft, based on 1,581 wells with recorded depths in the state CWI database. Half fall between 60 ft and 92 ft; 90% are shallower than 120 ft.
How much does it cost to drill a well in Crosslake (56442)?
Applying published per-foot rates to the local median depth of 72 ft: drilling and casing alone typically runs $1,800–$4,680; a complete system including pump, pressure tank, and hookup typically runs $4,320–$7,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Crosslake (56442)?
The median static water level is 19 ft below ground surface (middle half of wells: 12 ft–30 ft), from 611 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Crow Wing County.
Part of Crow Wing County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.