⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Morrison County › Randall (56475)

Randall, MN (56475): well depth, water level & drilling cost

✓ 338 CWI records · Morrison County

74 ftmedian well depth
56 ft–112 fttypical depth range
26 ftmedian static water level
14 gpmmedian yield (295 tests)

How deep are wells in Randall (56475), Minnesota?

The median drilled well depth in Randall (56475) is 74 ft, based on 337 wells with recorded depths in the state CWI database. Half fall between 56 ft and 112 ft; 90% are shallower than 217 ft.

How much does it cost to drill a well in Randall (56475)?

Applying published per-foot rates to the local median depth of 81 ft: drilling and casing alone typically runs $2,025–$5,265; a complete system including pump, pressure tank, and hookup typically runs $4,860–$8,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Randall (56475)?

The median static water level is 26 ft below ground surface (middle half of wells: 14 ft–44 ft), from 248 measurements.

Pull every recorded well near a Randall (56475) address — $19

Drilled depth distribution

0–50 ft 53 50–100 ft 189 100–150 ft 36 150–200 ft 18 200–300 ft 39 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Randall (56475)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Morrison County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.