Minnesota Well Data › Traverse County › Tintah (56583)
Tintah, MN (56583): well depth, water level & drilling cost
✓ 58 CWI records · Traverse County
Pull every recorded well near a Tintah (56583) address — $49
How deep are wells in and around Tintah (56583), Minnesota?
The median drilled well depth in and around Tintah (56583) is 132 ft, based on 58 wells with recorded depths in the state CWI database. Half fall between 85 ft and 215 ft; 90% are shallower than 280 ft.
How much does it cost to drill a well in and around Tintah (56583)?
Applying published per-foot rates to the local median depth of 132 ft: drilling and casing alone typically runs $3,300–$8,580; a complete system including pump, pressure tank, and hookup typically runs $7,920–$13,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Tintah (56583)?
The median static water level is 9 ft below ground surface (middle half of wells: 5 ft–15 ft), from 48 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Traverse County.
Part of Traverse County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.