⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Clearwater County › Shevlin (56676)

Shevlin, MN (56676): well depth, water level & drilling cost

✓ 562 CWI records · Clearwater County

92 ftmedian well depth
69 ft–122 fttypical depth range
34 ftmedian static water level
25 gpmmedian yield (542 tests)

Pull every recorded well near a Shevlin (56676) address — $49

How deep are wells in Shevlin (56676), Minnesota?

The median drilled well depth in Shevlin (56676) is 92 ft, based on 562 wells with recorded depths in the state CWI database. Half fall between 69 ft and 122 ft; 90% are shallower than 173 ft.

How much does it cost to drill a well in Shevlin (56676)?

Applying published per-foot rates to the local median depth of 92 ft: drilling and casing alone typically runs $2,300–$5,980; a complete system including pump, pressure tank, and hookup typically runs $5,520–$9,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Shevlin (56676)?

The median static water level is 34 ft below ground surface (middle half of wells: 18 ft–50 ft), from 456 measurements.

Drilled depth distribution

0–50 ft 27 50–100 ft 296 100–150 ft 157 150–200 ft 59 200–300 ft 22 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Shevlin (56676)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Shevlin (56676)

Free. Goes to licensed drillers working Clearwater County.

Part of Clearwater County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.