Minnesota Well Data › Marshall County › Strandquist (56758)
Strandquist, MN (56758): well depth, water level & drilling cost
✓ 227 CWI records · Marshall County
Pull every recorded well near a Strandquist (56758) address — $49
How deep are wells in and around Strandquist (56758), Minnesota?
The median drilled well depth in and around Strandquist (56758) is 65 ft, based on 222 wells with recorded depths in the state CWI database. Half fall between 15 ft and 123 ft; 90% are shallower than 243 ft.
How much does it cost to drill a well in and around Strandquist (56758)?
Applying published per-foot rates to the local median depth of 65 ft: drilling and casing alone typically runs $1,625–$4,225; a complete system including pump, pressure tank, and hookup typically runs $3,900–$6,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Strandquist (56758)?
The median static water level is 10 ft below ground surface (middle half of wells: 7 ft–15 ft), from 173 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Marshall County.
Part of Marshall County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.