Minnesota Well Data › Norman County
Norman County, Minnesota: well depth, water level & drilling cost
✓ 1,392 CWI records · verified 2026-09-28
Pull every recorded well near a Norman County address — $49
How deep are wells in Norman County, Minnesota?
The median drilled well depth in Norman County is 147 ft, based on 1,387 wells with recorded depths in the state CWI database. Half of all wells fall between 95 ft and 203 ft; 90% are shallower than 254 ft. Wells drilled since 2016 have a median depth of 152 ft.
How much does it cost to drill a well in Norman County?
Applying published per-foot rates to the local median depth of 147 ft: drilling and casing alone typically runs $3,675–$9,555; a complete system including pump, pressure tank, and hookup typically runs $8,820–$14,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Norman County?
The median static water level is 18 ft below ground surface (middle half of wells: 7 ft–25 ft), from 765 measurements.
How much water do wells in Norman County produce?
The median tested yield is 30 gpm (middle half: 15 gpm–50 gpm), from 977 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Norman County?
Drillers by number of wells completed in this county since 2016, per filed well records (Minnesota County Well Index).
| Driller | Wells since 2016 |
|---|---|
| ANDERSON, K | 17 |
| WESA, D. | 12 |
| WESA, D | 12 |
| LAKO, J | 8 |
| ANDERSON, K. | 6 |
| WESA, DOUG | 6 |
| KRAFT, C | 5 |
| FLUEGGE, J | 5 |
See every driller with wells on record in Norman County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Norman County.
Well records by ZIP code in Norman County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Ada (56510) — 290 wells, median 158 ft
- Twin Valley (56584) — 244 wells, median 113 ft
- Gary (56545) — 189 wells, median 132 ft
- Borup (56519) — 93 wells, median 145 ft
- Halstad (56548) — 89 wells, median 213 ft
- Perley (56574) — 63 wells, median 201 ft
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.