Minnesota Well Data › Swift County
Swift County, Minnesota: well depth, water level & drilling cost
✓ 1,826 CWI records · verified 2026-09-28
Pull every recorded well near a Swift County address — $49
How deep are wells in Swift County, Minnesota?
The median drilled well depth in Swift County is 104 ft, based on 1,824 wells with recorded depths in the state CWI database. Half of all wells fall between 64 ft and 154 ft; 90% are shallower than 205 ft. Wells drilled since 2016 have a median depth of 106 ft.
How much does it cost to drill a well in Swift County?
Applying published per-foot rates to the local median depth of 106 ft: drilling and casing alone typically runs $2,650–$6,890; a complete system including pump, pressure tank, and hookup typically runs $6,360–$10,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Swift County?
The median static water level is 19 ft below ground surface (middle half of wells: 10 ft–32 ft), from 1,592 measurements.
How much water do wells in Swift County produce?
The median tested yield is 50 gpm (middle half: 20 gpm–375 gpm), from 1,641 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Swift County?
Drillers by number of wells completed in this county since 2016, per filed well records (Minnesota County Well Index).
| Driller | Wells since 2016 |
|---|---|
| KLIMEK, D. | 22 |
| CONROY, J | 20 |
| KLIMEK, D | 19 |
| CONROY, J. | 14 |
| RIELAND, G. | 13 |
| RIELAND, G | 10 |
| MARCUS, C. | 9 |
| MEULEBROECK,J | 7 |
See every driller with wells on record in Swift County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Swift County.
Well records by ZIP code in Swift County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Benson (56215) — 459 wells, median 95 ft
- Appleton (56208) — 443 wells, median 105 ft
- Danvers (56231) — 241 wells, median 98 ft
- Murdock (56271) — 190 wells, median 115 ft
- Kerkhoven (56252) — 175 wells, median 127 ft
- Holloway (56249) — 170 wells, median 68 ft
- Clontarf (56226) — 142 wells, median 83 ft
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.