Minnesota Well Data › Redwood County › Lamberton (56152)
Lamberton, MN (56152): well depth, water level & drilling cost
✓ 128 CWI records · Redwood County
Pull every recorded well near a Lamberton (56152) address — $49
How deep are wells in Lamberton (56152), Minnesota?
The median drilled well depth in Lamberton (56152) is 133 ft, based on 128 wells with recorded depths in the state CWI database. Half fall between 98 ft and 179 ft; 90% are shallower than 244 ft.
How much does it cost to drill a well in Lamberton (56152)?
Applying published per-foot rates to the local median depth of 133 ft: drilling and casing alone typically runs $3,325–$8,645; a complete system including pump, pressure tank, and hookup typically runs $7,980–$13,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Lamberton (56152)?
The median static water level is 35 ft below ground surface (middle half of wells: 24 ft–49 ft), from 110 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Redwood County.
Part of Redwood County well records.
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.