Minnesota Well Data › Redwood County
Redwood County, Minnesota: well depth, water level & drilling cost
✓ 1,706 CWI records · verified 2026-09-28
Pull every recorded well near a Redwood County address — $49
How deep are wells in Redwood County, Minnesota?
The median drilled well depth in Redwood County is 107 ft, based on 1,703 wells with recorded depths in the state CWI database. Half of all wells fall between 75 ft and 165 ft; 90% are shallower than 250 ft. Wells drilled since 2016 have a median depth of 125 ft.
How much does it cost to drill a well in Redwood County?
Applying published per-foot rates to the local median depth of 107 ft: drilling and casing alone typically runs $2,675–$6,955; a complete system including pump, pressure tank, and hookup typically runs $6,420–$10,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Redwood County?
The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–45 ft), from 1,340 measurements.
How much water do wells in Redwood County produce?
The median tested yield is 20 gpm (middle half: 11 gpm–40 gpm), from 1,210 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Redwood County?
Drillers by number of wells completed in this county since 2016, per filed well records (Minnesota County Well Index).
| Driller | Wells since 2016 |
|---|---|
| ERVIN, B. | 27 |
| GJERDE, M | 18 |
| GJERDE, M. | 14 |
| ERVIN, B | 13 |
| MARCUS, R | 12 |
| KUCK, TROY | 10 |
| MARCUS, R. | 9 |
| MARCUS, RYAN | 5 |
See every driller with wells on record in Redwood County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Redwood County.
Well records by ZIP code in Redwood County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Redwood Falls (56283) — 426 wells, median 106 ft
- Morgan (56266) — 206 wells, median 138 ft
- Wabasso (56293) — 149 wells, median 90 ft
- Sanborn (56083) — 135 wells, median 140 ft
- Lamberton (56152) — 128 wells, median 133 ft
- Belview (56214) — 111 wells, median 122 ft
- Walnut Grove (56180) — 109 wells, median 193 ft
- Vesta (56292) — 100 wells, median 72 ft
- Milroy (56263) — 99 wells, median 150 ft
- Lucan (56255) — 63 wells, median 77 ft
- Clements (56224) — 61 wells, median 100 ft
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.