⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Redwood County › Belview (56214)

Belview, MN (56214): well depth, water level & drilling cost

✓ 111 CWI records · Redwood County

122 ftmedian well depth
87 ft–168 fttypical depth range
34 ftmedian static water level
20 gpmmedian yield (99 tests)

How deep are wells in Belview (56214), Minnesota?

The median drilled well depth in Belview (56214) is 122 ft, based on 111 wells with recorded depths in the state CWI database. Half fall between 87 ft and 168 ft; 90% are shallower than 205 ft.

How much does it cost to drill a well in Belview (56214)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Belview (56214)?

The median static water level is 34 ft below ground surface (middle half of wells: 23 ft–53 ft), from 100 measurements.

Pull every recorded well near a Belview (56214) address — $19

Drilled depth distribution

0–50 ft 6 50–100 ft 30 100–150 ft 36 150–200 ft 24 200–300 ft 10 300–400 ft 0 400–600 ft 3 600+ ft 2
Looking at a specific property in Belview (56214)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Redwood County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.